Refer to the exhibit. A client has asked you to consult on an eBGP
loading question. Currently the AS 100 eBGP links have an average
outbound load of 65% and 20% respectively. On further investigation,
traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0
accounts for 20% each of the outbound load. The customer wants to spread
the load between the two eBGP links more evenly. The BGP attributes are
currently set at their default values.
If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eBGP links more evenly?
A. On router A, set the default local-preference to 50.
B. On router B, set the default metric to 150.
C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.
D. On router B, set the default local-preference to 150.
Answer: C
For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND NETWORKING Training visit www.zoomgroup.com
Join us on facebook
If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eBGP links more evenly?
A. On router A, set the default local-preference to 50.
B. On router B, set the default metric to 150.
C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.
D. On router B, set the default local-preference to 150.
Answer: C
For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND NETWORKING Training visit www.zoomgroup.com
Join us on facebook
No comments:
Post a Comment