CCNA - 640-802

Which command can you use to determine the Cisco IOS feature set on a Cisco router?
A.show version
B.dir flash:|include ios
C.show environment
D.show diag
E.show inventory
Answer: A

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNA - 640-802

What functions do routers perform in a network? (Choose two.)
A.packet switching
B.access layer security
C.path selection
D.VLAN membership assignment
E.bridging between LAN segments
F.microsegmentation of broadcast domains
Answer: AC

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNA 640-802

What is the purpose using the traceroute command?

A.to map all the devices on a network.
B.to display the current TCP/IP configuration values.
C.to see how a device MAC address is mapped to its IP address.
D.to see the path a packet will take when traveling to a specified destination.
E.to display the MTU values for each router in a specified network path from source to a destination.

Answer: D

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNA 640-802

Which protocol should be used to establish a secure terminal connection to a remote network device? Select the best response.

A.ARP
B.SSH
C.Telnet
D.WEP
E.SNMPv1
F.SNMPv2

Answer: B

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com

• Join us on facebook

CCNA 640-802

In the communication between host 1 and host 2 over the point-to-point WAN, which protocol or technology is represented by dashed line A?
A.IP
B.T1
C.PPP
D.IEEE 802.3

Answer: A

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

MCITP 70 - 642

Your network contains one Active Directory domain. You have a member server that runs Windows Server 2008 R2. You need to immediately disable all incoming connections to the server. What should you do?
A.From the Services snap-in, disable the IP Helper.
B.From the Services snap-in, disable the Netlogon service.
 C.From Windows Firewall, enable the Block all connections option on the Public Profile.
 D.From Windows Firewall, enable the Block all connections option on the Domain Profile.
Answer: D

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

MCITP 70 - 642

Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2. You need to be notified by e-mail if the DNS service logs errors or warnings. The solution must minimize the number of e-mail notifications you receive. What should you do?
A.Create an alert in Performance Monitor.
 B.Run the Configure a DNS Server Wizard.
C.Select the DNS Server log from Event Viewer and attach a task to the log.
D.Create a custom view from Event Viewer and attach a task to the custom view.
Answer: D
For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

MCITP 70 - 642

Your network contains a server named Server1 that runs Windows Server 2008 R2. You need to identify which processes perform the most disk writes and disk reads per second. Which tool should you use?
A.Disk Management
B.Reliability Monitor
C.Resource Monitor
D.Storage Explorer
Answer: C

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

Exam Question : MCITP : 70-640

Your company has an Active Directory domain. A user attempts to log on to the domain from a client computer and receives the following message: “This user account has expired. Ask your administrator to reactivate the account.” You need to ensure that the user is able to log on to the domain. What should you do?

A.Modify the properties of the user account to set the account to never expire.
B.Modify the properties of the user account to extend the Logon Hours setting.
C.Modify the default domain policy to decrease the account lockout duration.
D.Modify the properties of the user account to set the password to never expire.

Answer: A
For Best  MCITP  Training,visit www.zoomgroup.com
Join us on facebook

Exam Question : MCITP : 70-640

You need to remove the Active Directory Domain Services role from a domain controller named DC1. What should you do?
A.Run the netdom remove DC1 command.
B.Run the Dcpromo utility. Remove the Active Directory Domain Services role.
C.Run the nltest /remove_server: DC1 command.
D.Reset the Domain Controller computer account by using the Active Directory Users and Computers utility.
Answer: B

For Best  MCITP Training,visit www.zoomgroup.com

Join us on facebook

Exam Question : MCITP : 70-640

You have an existing Active Directory site named Site1. You create a new Active Directory site and name it Site2.
You need to configure Active Directory replication between Site1 and Site2. You install a new domain controller.
You create the site link between Site1 and Site2.
What should you do next?
A.Use the Active Directory Sites and Services console to assign a new IP subnet to Site2. Move the new domain controller object to Site2.
B.Use the Active Directory Sites and Services console to configure a new site link bridge object.
C.Use the Active Directory Sites and Services console to decrease the site link cost between Site1 and Site2.
D.Use the Active Directory Sites and Services console to configure the new domain controller as a preferred bridgehead server for Site1.
Answer: A
For Best MCITP  Training,visit www.zoomgroup.com
Join us on facebook

CCNA:640-802

What are two characteristics of Telnet? (Choose two.)

A.It sends data in clear text format.
B.It is no longer supported on Cisco network devices.
C.It is more secure than SSH.
D.It requires an enterprise license in order to be implemented.
E.It requires that the destination device be configured to support Telnet connections.
 
Answer: AE

CCNA:640-802

Drag & Drop

                                       

 

 
 
 
Answer:

For Best CCNA Training,visit www.zoomgroup.com
Join us on facebook

CCNA - 640-802

 Refer to the exhbit:

What kind of cable should be used to make each connection that s identified by the numbers shown?
A.1 - Ethernet straight-through cable
   2 - Ethernet crossover cable
   3 - Serial cable
   4 - Ethernet straight-through cable
B. 1 - Ethernet rollover cable
    2 - Ethernet crossover cable
    3 - Serial cable
    4 - Null modem cable
C.1 - Ethernet straight-through cable
    2 - Ethernet crossover cable
    3 - Serial cable
   4 - Rollover cable
D.1 - Ethernet crossover cable
    2 - Ethernet straight-through cable
   3 - Fiber Optic cable
   4 - Rollover cable
   E.1 - Ethernet straight-through cable
       2 - Ethernet straight-through cable
      3 - Serial cable
      4 - Rollover cable

Answer: E

For Best CCNA Training,visit www.zoomgroup.com
Join us on facebook

CCNA: 640-802

Refer to the exhibit:

A network administrator attempts to ping Host2 from Host1 and receives the result that are shown. What is a possible problem?

A.The link between Host1 and Switch1 is down.
B.TCP/IP is not functioning on Host1.
C.The link between Router1 and Router2 is down.
D.The default gateway on Host1 is incorrect.
E.Interface Fa0/0 on Router1 is shudown.
F.The link between Switch1 and Router1 is down.

Answer: C

For Best CCNA training,visit www.zoomgroup.com
Join us on facebook

CCNA: 640-802

Refer to the exhibit:

The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three.)

A.Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.Ensure that cables A and B are straight-through cables.
C.Ensure cable A is plugged into a trunk port.
D.Ensure the switch has power.
E.Reboot all of the devices.
F.Reseat all cables.
Answer: BDF

For Best CCNA training,visit www.zoomgroup.com
Join us on facebook

CCNA: 640-802

Which of the following statements describe the network shown in the graphic? (Choose two.)

A.There are two broadcast domains in the network.
B.There are four broadcast domains in the network.
C.There are six broadcast domains in the network.
D.There are four collision domains in the network.
E.There are five collision domains in the network.
F.There are seven collision domains in the network

Answer: AF

For Best CCNA training,visit www.zoomgroup.com
Join us on facebook

CCNA - 640-802

Which one of the following varieties of NAT utilizes different ports to map multiple IP addresses to a single globally registered IP address?

A.Static NAT
B.Dynamic NAT
C.Overloading
D.Overlapping
E.Port loading
 
Answer: C

For Best CCNA training,visit www.zoomgroup.com
Join us on facebook

CCNA - 640-802

Which address are OSPF hello packets addressed to on point-to-point networks

A.224.0.0.5
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.254.255.255.255
 
Answer: A
For Best CCNA training,visit www.zoomgroup.com
Join us on facebook 

CCNA - 640-802

To what does the 128 refer to in the router output above?

A.OSPF priority
B.OSPF hop count
C.OSPF ID number
D.OSPF cost
E.OSPF administrative distance
 
Answer: D
For Best CCNA training,visit www.zoomgroup.com
Join us on facebook