CCNP Routing 642-902

Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values.


If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eBGP links more evenly?
A. On router A, set the default local-preference to 50.
B. On router B, set the default metric to 150.
C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.
D. On router B, set the default local-preference to 150.
Answer: C
For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNP Routing

A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated to all of the devices. The route is not now in any of the routing tables. The administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still does not appear in any of the routing tables. What should be done to propagate this route?
A. Clear the BGP session.
B. Use the release BGP routing command.
C. Use the service-policy command to adjust the QOS policy to allow the route to propagate.
D. Change both the inbound and outbound policy related to this route.
Answer: A
For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNP Routing – 642-902

Which two routing protocols require a metric to be configured when redistributing routes from other protocols? (Choose two.)
A.RIP
B.OSPF
C.EIGRP
D.IS-IS
E.BGP
Answer: AC
For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNP Routing – 642-902

A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated to all of the devices. The route is not now in any of the routing tables. The administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still does not appear in any of the routing tables. What should be done to propagate this route?
A.Clear the BGP session.
B.Use the release BGP routing command.
C.Use the service-policy command to adjust the QOS policy to allow the route to propagate.
D.Change both the inbound and outbound policy related to this route.
Answer: A

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNP Routing – 642-902

Which command displays statistics on EIGRP hello, updates, queries, replies, and acknowledgments?
A.    debug eigrp packets
B.     show ip eigrp traffic
C.     show ip eigrp topology
D.    show ip eigrp neighbors
Answer: B

For Best CISCO/MCITP/LINUX/EXCHANGE SERVER/PC HARDWARE AND  NETWORKING Training visit www.zoomgroup.com
Join us on facebook

CCNP Route (640-902)

which two types of routes will be advertised with the EIGRP configuration as shown? (Choose two.)
   router eigrp 100
        network 10.0.0.0 eigrp stub
Select the 2 best responses.

A. static
B. receive-only
C. summary
D. stub
E. connected
F. dynamic

Answer: CE

For Best CCNP Training,visit www.zoomgroup.com
Join us on facebook

CCNP Route (640-902)

A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table on RouterA. The following information is available from RouterA:

configuration:
router bgp 65001
network 10.0.0.0
neighbor 172.16.1.1 remote-as 65002 no auto-summary

routing table information:
show ip route | include 10
   O 10.10.10.0/24 [110/11] via 192.168.1.1, 2d00h, Ethernet0/0

Select the best response.
Why is this prefix not in the local BGP table?
A. This route is not a BGP learned route.
B. The network command is wrong.
C. The 172.16.1.1 neighbor is down.
D. The prefix 10.10.10.0/24 is not a 'connected' route.
 
Answer: B

For Best CCNP Training,visit www.zoomgroup.com
Join us on facebook

CCNP Route (640-902)

What are two possible causes for EIGRP Stuck-In-Active routers? (Choose Two)
Select the 2 best responses.

A. Some query or reply packets are lost between the routers.
B. The neighboring router starts receiving route updates from this router.
C. A failure causes traffic on a link between two neighboring routers to flow in only one direction (unidirectional link).
D. The neighboring router stops receiving ACK packets from this router.

Answer: AC

For Best CCNP Training,visit www.zoomgroup.com
Join us on facebook

CCNP (ROUTE):642-902

Which of the below mentioned conditions form a neighbor relation in EIGRP? (Choose Three)
Select the 3 best responses.
A. Hello or ACK received
B. AS number match
C. Hello timer match
D. Identical metric(k vlaues)
E. Dead Timer Match F. Network Time Match
 
Answer: ABD

For Best CCNP training,kindly visit www.zoomgroup.com
Join us on facebook

CCNP (ROUTE):642-902

A stub area is typically created using what kind of topology?
Select the best response
A. Broadcast
B. Point-to-point
C. Hub and spoke
D. Full Mesh

Answer: C

For Best CCNP training,kindly visit www.zoomgroup.com
Join us on facebook
 

CCNP (ROUTE): 642-902

Which statement is true about an IPsec/GRE tunnel?
Select the best response
A. The GRE tunnel source and destination addresses are specified within the IPsec transform set.
B. An IPsec/GRE tunnel must use IPsec tunnel mode.
C. GRE encapsulation occurs before the IPsec encryption process.
D. Crypto map ACL is not needed to match which traffic will be protected.
 
Answer: C

For Best CCNP training,kindly visit  www.zoomgroup.com
Join us on facebook

Exam Question : CCNP (Switch) - 642-813

The following command was issued on a router that is being configured as the active HSRP router.
standby ip 10.2.1.1
Which statement about this command is true?

A.This command will not work because the HSRP group information is missing.
 B.The HSRP MAC address will be 0000.0c07.ac00.
C.The HSRP MAC address will be 0000.0c07.ac01.
D.The HSRP MAC address will be 0000.070c.ac11.
E.This command will not work because the active parameter is missing.
 
Answer: B


For Best CCNP Training, kindly visit www.zoomgroup.com

join ZOOM TECHNOLOGIES on facebook

Exam Question : CCNP ROUTE - 642-902

Which two statements are true about 6to4 tunnels? (Choose two.)Select the 2 best responses.
A. In a 6to4 tunnel, the first two bytes of the IPv6 address will be 0×2002 and the next four bytes will be the hexadecimal equivalent of the IPv4 address.
 B. In a 6to4 tunnel, the first two bytes of the IPv6 address will be locally derived and the next two bytes will be the hexadecimal equivalent of the IPv4 address.
 C. In a 6to4 tunnel, the IPv4 address 192.168.99.1 would be converted to the 2002: c0a8:6301::/48 IPv6 address.
 D. In a 6to4 tunnel, the IPv4 address 192.168.99.1 would be converted to the 2002: c0a8:6301::/16 IPv6 address.
 E. In a 6to4 tunnel, the IPv4 address 192.168.99.1 would be converted to the 2002:1315:4463:1::/64 IPv6 address

Answer: AC

For Best CCNP Training, kindly visit  http://www.zoomgroup.com/

Exam Question : CCNP ROUTE - 642-902

Which two statements about 6to4 tunneling are accurate? (choose two)Select the 2 best responses.

 A. Prepending a reserved IPv6 code to the hexadecimal representation of 192.168.0.1 facilitates 6to4       
      tunneling
 B. 2002::/48 is the address range specifically assigned to 6to4
 C. Each 6to4 site receives a /48 prefix in a 6to4 tunnel
 D. Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4 tunning
 E. 6to4 is a manual tunnel method

Answer: CD

For Best CCNP Training, kindly visit http://www.zoomgroup.com/
ww.

Exam Question : CCNP ROUTE - 642-902

What does the default value of the EIGRP variance command of 1 mean?Select the best response.
A. Load balancing is disabled on this router.
 B. The router performs equal-cost load balancing.
C. Only the path that is the feasible successor should be used.
 D. The router only performs equal-cost load balancing on all paths that have a metric greater than

1.Answer: B

For Best CCNP Training visit http://www.zoomgroup.com/ 

Exam Question : CCNP ROUTE - 642-902

You are troubleshooting an OSPF problem where external routes are not showing up in the OSPF database.
Which two options are valid checks that should be performed first to verify proper OSPF operation? (Choose two.)
Select 2 response(s).

A. Are the ASBRs trying to redistribute the external routes into a totally stubby area?
B. Are the ABRs configured with stubby areas?
C. Is the subnets keyword being used with the redistribution command?
D. Is backbone area (area 0) contiguous?
E. Is the CPU utilization of the routers high?
 
Answer: AC

For Best CCNP Training, kindly visit www.zoomgroup.com

Exam Question : CCNP ROUTE - 642-902

He maximum number of routers per OSPF area typically depends on which three factors? (Choose three.)

Select 3 response(s).

  A. The kind of OSPF areas being implemented

  B. The number of external LSAs in the network 

  C. The number of DRs and BDRs in the areas

  D. The number of virtual links in the areas

  E. How well the areas can be summarized

  F. The use of LSA filters

Answer: ABE
 
For Best CCNP Training, kindly visit www.zoomgroup.com

Exam Question : CCNP ROUTE - 642-902

ou have completed an OSPF implementation, and you are verifying OSPF operation.
During this verification, you notice that the OSPF route of 172.16.10.0 is repeatedly appearing and disappearing from the routing table. Further investigation finds that the OSPF CPU utilization is very high and the routers are constantly performing SPF calculations. You determine that 172.16.20.2 is the source of the 172.16.10.0 route.
Using the show ip ospf database router 172.16.20.1 command, you notice that when this show command is performed repeatedly, the contents of the LSA change every few seconds.
What could be the cause of this problem?

Select the best response.

A. OSPF authentication errors between some of the routers.
 B. Two routers have the same OSPF router ID.
C. Issues with mistuned OSPF timers.
D. OSPF LSA pacing issues between some of the routers.
 E. OSPF neighbor adjacency problems between some of the routers.
 
Answer: B

For Best CCNP Training, kindly visit www.zoomgroup.com

Exam Question : CCNP ROUTE - 642-902

Refer to the exhibit. What is the effect of the OSPF configuration on router B?

Select the best response.

A. All interfaces will be in area 0.

B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1.

C. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2.

D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2.

Answer D

For Best CCNP Training, kindly visit www.zoomgroup.com

Exam Question : CCNP ROUTE - 642-902

 

Refer to the exhibit. Two routers are connected by Frame Relay and are running OSPF between them. Each router has been configured with the appropriate network statements under router ospf 1, but the routers are not forming an adjacency.

Which of the following three commands could be configured on each router to correct this problem? (Choose three.)

Select 3 response(s).

A. RouterC(config-if)#ip ospf network broadcast

   RouterD(config-if)#ip ospf network broadcast

B. RouterC(config-if)#ip ospf network point-to-point

   RouterD(config-if)#ip ospf network point-to-point

C. RouterC(config-router)#neighbor 10.100.100.4

   RouterD(config-router)#neighbor 10.100.100.3

D. RouterC(config-router)#neighbor 10.255.255.254

   RouterD(config-router)#neighbor 10.255.255.253

Answer: ABD

For Best CCNP Training, kindly visit www.zoomgroup.com